Interlaboratory comparison

 

   

Asia-Pacific Metrology Program; Calibration of Gauge Blocks by Mechanical Comparison
It was held in 2006-2007, 7 participant conducted the intercomparison with the pilot laboratory as KIM-LIPI, Indonesia. The standard used for intercomparison are steel gauge blocks 1, 5. 10, 50,100 mm
Tungeston Carbide gauge blocks 1, 5, 10, 50, 100 mm

 
   

EC-MEDA Regional Co-Operation Program; Interlaboratory Comparison Metrology - Mass
It was held in 2007-2008, 14 organization from 11 countries conducted the intercomparison with the pilot laboratory as DFM, Denmark. The standard used for intercomparison are Stainless Steel Weights 100g, 100mg

 
   

Mass Intercomparison in the Middle East Program
It was held in 2007, 6 organization from 6 countries conducted the intercomparison with the pilot laboratory as PTB, Germany. The standard used for intercomparison are Stainless Steel Weights 1kg, 100g, 100mg

 
   

EMLMF Intercomparison Program for Volume Measurement
It was held in 2010, 6 organization from 5 countries conducted the intercomparison . The standard used for intercomparison are Volumetric apparatus 5mL, 100uL, 25mL

 
   

APMP Supplementary Comparison of Industrial Platinum Resistance Thermometer
It was held in 2009-2015, 16 organization conducted the intercomparison with the pilot laboratory as SIRIM, Malaysia. The standard used for intercomparison IPRT for the range -50 to 400 oC. Draft Report was issued in 2015 and the results were successful

 
   

AFRIMETS-AFM, Calibration of MASS (Name: Mass 2014, comparison with Afrimets)
It was held in 2011-2013, 6 organization conducted the intercomparison with the pilot laboratory as NIS, EYGPT. The standard used for intercomparison masses with the values 1000g, 500g, 20g, 2g, 0.1g and the results were successful

 
   

AFRIMETS; Supplementary Comparison Programme Calibration of Gauge Blocks by Mechanical Comparison Method (name: Dimensional 2014, Comparison with Afrimets)
It was held in 2011-2013, 6 organization conducted the intercomparison with the pilot laboratory as NIS, EYGPT. The standard used for intercomparison gauge blocks with the following values 1mm, 5mm, 10mm, 40mm, 90mm and the results were successful

 
   

SUPPLEMENTARY COMPARISON ON DIGITAL MULTIMETER (P1-APMP.EM-S8) (name: APMP.EM-S8_DRAFT A Report, Date of participation 2015)
It was held in 2011-2013, 17 organization conducted the intercomparison with the pilot laboratory as National Physical Laboratory, New Delhi. The standard used for intercomparison is Digital Multimeter with measuring the following parameters DC Voltage, DC Current, DC Resistance, AC Voltage, AC Current and the results were successful

 
   
   
   
   
   
     
     
     
     
     
 
 


2012 JNMI - RSS. All Rights Reserved.